[urq] door window surround trim is disconnecting

[Charles Baer]

Ahhh yes, that's the stuff, had to go forward a couple of pages from doors
to moldings.  FA works better when you aren't hurrying to make a meeting.

I did take a moment when things quieted down around here and looked
it over.  Time is taking its toll but they seemed to press back on well
enough that they won't self-destruct in the immediate future.

Thanks,

Charlie


Jim Haseltine wrote:

> Do you mean the inside trim (inside the car that is) or the outside 
> trim. The part you've listed is the strip of plastic that runs round 
> the inside of the window frame and there's no clips behind it, it just 
> snaps around the metal edge. If you mean the metal trim on the outside 
> of the window frame then that's 855 853 322 for the upper piece and 
> 855 853 324 for the vertical piece. The corner clip is 855 853 339 B.
> The clips that hold the metal strips in place are 855 853 329.
>
> Regards,
>
> Jim Haseltine
>
>
>
> ----- Original Message ----- From: "Charles Baer" <charlie at istari.com>
> To: "urq list" <urq at audifans.com>
> Sent: Wednesday, July 27, 2005 3:53 PM
> Subject: [urq] door window surround trim is disconnecting
>
>
>> The upper rear corner of the window frame trim on my passenger
>> door is popping off (at the mitred corner).  There appear to be clips
>> under it that should mate up and hold it in.  It looks like the part 
>> # in
>> the FA is 855-837-438 for the trim (16) and 831-833-719 for the
>> clip (18).
>>
>> Anybody fixed a similar problem ?  The trim looks so fragile that I
>> should jump on it before I lose one of those NLA components.  Just
>> noticed it as I arrived at work today so I haven't had time to try to
>> pop it back on, and I don't want to try that without looking it over to
>> make sure I don't break something.
>>
>> Charlie
>