[urq] 3B conversion

[Ben Swann]

It is not difficult to machine the cutout in the older transmission, but
don't wait until you have the engine bolted in place.  It is a more
difficult job to do in situ :-{

Ben

[Date: Wed,  1 Jun 2005 17:28:40 +0100
From: "Martin Pajak" <Martin at quattro.ca>
Subject: Re: [urq] 3B conversion
To: K B <audinut2004 at sbcglobal.net>
Cc: urq at audifans.com
Message-ID: <200506011728.AA2583364114 at quattro.ca>
Content-Type: text/plain; charset=us-ascii

I know the '83 tranny does not have the cutout for the stock 3B/MC sensor
block.  I had to use a 5ktq tranny to be able to use stock MC sensor block.
The WX sensor block (single) might have issues, I never got into it as a
5ktq tranny was available to me.

HTH
Martin Pajak

http://www.quattro.ca]