[urq] CIS removal

[Thatcher Hubbard]

I'm at about this point in taking mine out too, and as far as I can
tell, the black wire is the ignition switched 12V and the green wire
with the purple stripe goes to the fuel pump relay.  No idea what the
second one is for.  I didn't have any idea what I was doing when I got
into this EFI swap.  The mechanical parts and the under-the-hood
wiring seem like they'll be easy, but the stuff in the cab is a bitch.

On 6/18/05, AudiQtroCp at aol.com <AudiQtroCp at aol.com> wrote:
> I hinted in my drag strip post about my day of CIS extraction.
> 
> I got all the intake stuff off and went to work on the harness.  I managed to
> get the grey harness out unscathed but have a few questions before I proceed
> with the brown harness.
> 
> 
> *First, there is a loom that runs from the ECU over to the drivers side with
> three wires in it, does anyone know what these three wires are? Do I need to
> send some signal back over there when I do the swap (not sure whats going back
> in yet) or was this an input of some sorts?
> 
> *Second, The brown harness looks like a real bitch.  If for anything  - where
> it runs thru the firewall.  How should I handle this harness, what should be
> kept and should I bother to save it ( what in it should I save ).   It the
> brown harness any value to anyone?  Im prolly going to sell off the ECU and CIS
> crap to one of the 4K guys that use some of it for their turbo upgrades...
> 
> thanks in advance
> sean
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>