[urq] Help me with my Boost pressure testing methodology
Ingo Rautenberg
i.rautenberg at waratap.com
Fri Mar 18 11:48:21 EST 2005
Symptoms are (with no load), once the duty cycle is set and the checks on
it's operation are OK, actual running under load is problematic if not
impossible, though occasionally boost of 13/14 psi can be attained. If the
car stalls, I cannot restart without tweaking the mixture a couple of turns
clockwise :-( I ran a check on the cat temp and at 2000 rpm after warmed
up got surface reading of 450 -475 degrees F at the front and the back of
cat. When the car dies I will either get what sounds like an intake
backfire or nothing -- and I mean nothing, like someone turned off a switch.
The fuel pump is wired to run with the ignition on. Fuel system pressures
check out (90 and 55 PSI).
----- Original Message -----
From: "Brandon Rogers" <brogers at terrix.com>
To: "Ingo Rautenberg" <i.rautenberg at waratap.com>
Cc: <urq at audifans.com>
Sent: Friday, March 18, 2005 11:27 AM
Subject: Re: [urq] Help me with my Boost pressure testing methodology
> what are the symptoms again?
>
> Brandon
>
> ----- Original Message -----
> From: "Ingo Rautenberg" <irautenberg at comcast.net>
> To: <a.sigal at bluewin.ch>
> Cc: <urq at audifans.com>
> Sent: Wednesday, March 16, 2005 9:45 PM
> Subject: Re: [urq] Help me with my Boost pressure testing methodology
>
>
> > Thanks, Ado
> >
> > Pressure test (on major plumbing) came out perfectly and spraying
> > statrting
> > fluid on all the other hoses revealed nothing. Actually, I think I've
> > narrowed it down to the fuel distributor (ouch!) or possibly melted cat.
> > The ECU tests seem OK. Still need to check fuel flow (pressure checks
out
> > OK as well).
> >
> > Suggestions welcome.
> >
> > Ingo
> >
> >
> > ----- Original Message -----
> > From: "Ado Sigal" <a.sigal at bluewin.ch>
> > Cc: "Ingo Rautenberg" <i.rautenberg at waratap.com>; <urq at audifans.com>
> > Sent: Wednesday, March 16, 2005 7:40 PM
> > Subject: Re: [urq] Help me with my Boost pressure testing methodology
> >
> >> Ingo, you should plug top of the ribbed hose from the igloo on one
side,
> >> and hose into throttle body on the other, with one end valved. Most
> >> suspect components are in that chain. Have seen several places selling
> >> those, mostly for RS2. Brewing industry supplier should carry that size
> >> plugs in various materials.
> >>
> >> Cheers,
> >>
> >> Ado
> >>
> >>
> >>
> >>
> >> --
> >> No virus found in this incoming message.
> >> Checked by AVG Anti-Virus.
> >> Version: 7.0.308 / Virus Database: 266.7.3 - Release Date: 3/15/2005
> >>
> >>
> >
> > _______________________________________________
> > Audifans urq mailing list
> > Send posts to: mailto:urq at audifans.com
> > Manage your list connection:
http://www.audifans.com/mailman/listinfo/urq
> > Have an urq question? Check the Audifans Knowledgebase!
> > http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> > Have an urq answer? ... Please help others by adding to the KB ... all
> > contributions welcome!
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.857 / Virus Database: 584 - Release Date: 2/10/2005
More information about the urq
mailing list