[urq] Lewis Firewall Brace Install Q's

[Ed Kellock]

It really is very straightforward once you get in there. The main feature of
it is that it "connects" the mounting function to the two bolts for the rack
where it passes through the inner fender. That pretty much defines its
orientation in there. I found the directions provided with the brace to be
very helpful.
 Ed
 On 10/21/05, Pasqualoni, James E <james.pasqualoni at gs.com> wrote:
>
> Guys,
>
> I am going to tackle the clutch slave and master cylinders along with the
> master to slave hose and the Lewis firewall brace. Any BTDT on the
> firewall
> brace install? I haven't been up in there to look at how to orient the
> brace, and I'm sure it is self-evident and mounts to existing points.
> However, any BTDT or other wisdom herein imparted would be most
> appreciated.
>
> TIA (once again),
> Jim
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question? Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>