[urq] EFI conversion update

[Thatcher Hubbard]

Hi all,

  Well, as of 10 minutes ago, I got a blinking green light on the side
of my 034EFI Stage IIb unit.  The downside is that I had to butt
splice a 14g wire with the existing 16 or 18g wire to get power to the
unit because I have no idea how and where to get pins that fit into
the connectors on the back of the fusebox, but for testing purposes,
I'll call it a win.

  I'm wondering if anyone has a Digi-Key (or other) part number for
pins.  I tried using the Digi-Key parts seach thing and my eyes glazed
over about 30 seconds into it, it's all greek to me.  I do know that
the connectors say 'AMP' on them at the very base, hopefully that
means I can still get my hands on them.

  Also, do anyone have any info about which wires come into the
fusebox and where to control the fuel pump relay?  I should only have
to swap one wire, but I don't have any idea which one.

  Thanks for any info anyone here can throw my way, I actually think
this isn't going to be as bad as I thought.