[urq] Bad clutch master cylinder?

[Ed Kellock]

Hey, my CGT does the first 2 things, but not the rest.  I wonder about
it, but that's about it.  The rest of the shift operation is fine.

Ed

----- Original Message ----- 
From: "eric harten" <audi90sq at yahoo.com>
To: "urq" <urq at audifans.com>
Sent: Friday, September 16, 2005 11:05 AM
Subject: [urq] Bad clutch master cylinder?


> I was wondering if folks could help me out with this one.  My car
seems to be
> having issues with the clutch.  Here are all the symptoms so far:
>
> - Gear lever is hard to pull into neutral after sitting over-night
(initial
> pull)
> - Car seem to pull forward slightly (with clutch in) in initial
start-up, then
> no problem
> - Gear lever gets hard to pull out of 3rd gear after trans warms up
(no issue
> when cold)
> - No problems shifting into ANY gear
> - No grinding sounds at all
> - Trans shifts perfectly when cold
>
> I bled the clutch the other day and noticed air bubbles in the
bleeder line
> when my buddy pumped the clutch.  I can't help but think the seals
in the MC
> might be bad.  I would like to verify before I order this $150 part
though.
> Thanks
>
> Eric Harten
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection:
http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ...
all contributions welcome!