[urq] Big Brakes for Ur-q

[Rich Letsinger]

Justin,
 I have a brand new set of 993t calipers (BigReds) and an unused hardware 
kit from RPI to mount them on an urq with 993t rotors. I do not have the 
rotors, but can get them. RPI's kit includes brackets, hats, bolts and 
lines, everything you need.
 I have test fit this setup and it did not work with the 16x7.5 urS6 wheel 
with a 12mm spacer. That's what I was hoping to run, so the parts are 
sitting around available if you want them. I believe it will work with the 
urS4 wheels if you run a 16mm spacer. That would make an effective offset of 
ET24 with your 16x8 urS4 wheels which would match the offset of the stock 
15x8 Ronal wheels.
 I can test fit this for you as I have 16mm spacers and my buddy has a set 
of urS4 wheels I can borrow. I know this setup works with 8mm spacers and 
both the 17x8 ET35 Ronal R28 and the 17x8 ET35 BBS RK. Let me know, you can 
have it all for my cost.
 RPI BigRed Kit: $495
993t calipers: $800
993t rotors: $400 (this is 10% over dealer cost)
 Cheers,
Rich
 http://www.rpiequipped.com/store/c192460.2.html