[urq] Front/Rear Suspension Updates

[Brandon Rogers]

Do these newer CA's use the same old CA bushing as our cars?  I'm
assuming yes...

Brandon

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On
Behalf Of Renneisen, Eric 475
Sent: Thursday, August 10, 2006 2:32 PM
To: urq at audifans.com
Cc: urquattro at comcast.net
Subject: [urq] Front/Rear Suspension Updates


> I am talking about the '91 Forged control arms that look like a big V.

> Those do have a provision for sway bar attachment, but yes, CQ never 
> used it as the sway bar on those cars attaches traight onto the strut.

Gotcha.  I guess I never paid enough attention to the forged arms to 
notice the unused link mount.  FYI, for those looking, those arms 
should be available from the front of any '91 and later 80/90 
(including FWD), not just the CQ.

Eric R.
'86 urq
'93 S4




------------------------------------------------------------------------
------
CONFIDENTIALITY NOTICE: If you have received this email in error, please
immediately notify the sender by e-mail at the address shown.  This
email transmission may contain confidential information.  This
information is intended only for the use of the individual(s) or entity
to whom it is intended even if addressed incorrectly.  Please delete it
from your files if you are not the intended recipient.  Thank you for
your compliance.  Copyright 2006 CIGNA
========================================================================
======
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection:
http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!