[urq] 034 EFI

[Justin]

Bill, Javad has sold many of these units.  I've got one in my 4kq turbo. No
problems at all. They will leak ab bit at first cause it's aluminum
threads...that's how they are.

Did you try Telfon paste?  My install would not stop leaking until I used
the paste.  Now it's dry.


----- Original Message -----
From: "Bill Bennett" <bill_bennett at comcast.net>
To: "Javad Shadzi" <javad at 034motorsport.com>
Cc: <urq at audifans.com>
Sent: Wednesday, July 19, 2006 11:22 PM
Subject: [urq] 034 EFI


> and the fuel leaks on the fuel rail directly above the exhaust manifold
> until I chose to have the fittings tigged, it was not spot on, your rail
> sucked wind, it leaks gas sure hope you upgrade it, so it does not drip
> gasoline on the exhaust manifold, tigging the AN fittings stopped the
drip,
> no sealant could cure the leak, cost me another $50.00 to have the
fittings
> tigged, thank the spirits that the non replaceable car did not get set on
> fire... nothing could replace this car,, ever
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>