[urq] Alternator

[Bob D]

Im using the UrQ alternator on my 3B upgrade with no problems. I also 
have a couple of good sized amps and subs and never had any kind of 
problems...not to mention the 400 watts of high beams as well. I dont 
have seat heaters though, (well I do, but the drivers side doesnt work)


Brandon Rogers wrote:
> Since the 3B conversion - I've been using the Alt from the 200 - which
> is 120 AMP IIRC.  And IIRC the urq Alt is 90 AMP.  To use the 2B
> Relocation Bracket I think I must use the Urq Alt - and I guess I just
> want to make sure the 90 AMP is adequate in full usage scenarios since I
> htink I'd be using more than what ever came from the factory - Full Elec
> usage in summer could consist of a/c, the big 200 20V cooling fan ( up
> to 500W??), hi beams at 4 X 100W plus other lights, stereo (120W -ish
> max).....hmm wipers etc
>  
> and in winter - heated seats, hi beams, rear defrost, stereo, cooling
> fan
>  
> I think you get the picture - 
>  
> thoughts?
>  
> TIA
>  
> Brandon
> '84 urquattro 20Vt
> '01.5 S4
> '98 A4 1.8Tq
>  
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>