[urq] Personal steering wheel adaptor

[Mike Del Tergo]

Since you mentioned Eric is no penny pincher, you can check Audi PN 893 064 
706 B.  A quick look at the orientation, or lack therof of the horn ring 
will let you know.  IIRC the Nardi # is 803C, but then many Audi/VW apps 
from the day will work. Including as Ingo mentioned the MOMO 8010.  I've 
never had them both in my hand at the same time so knowing the hole offset 
allows redrilling with some room says this may be the preferrred way out.  
You can also get a MOMO to Nardi adapter for about $30.  Basically a 10mm 
spacer with the correct predrilled offsets.  Some where I have a spare UrQ 
hub, definantely a few for the ATIWE wheel which I think made the Audi UR 4 
spoke sport wheel and certainly the Porsche 930 version.  You coming to MOT? 
  I could try to rustle some up.  Still a bunch of fair condition sports and 
many typ 44's hubs around!
Mike



From: "Louis-Alain Richard" <laraa at sympatico.ca>
Subject: [urq] Personal steering wheel adaptor

Eric just bought an almost new Audi sport steering wheel from a 80 or
90. Problem is the adaptor is not the right one for his urQuattro.
Anybody has a source for these, are they all the same among the steering
wheel manufacturers ?

Louis-Alain