[urq] MC1 oil cooler fitting

[Justin]

You need a fitting much like this:
http://www.034motorsport.com/product_info.php?cPath=40_52&products_id=163,
with the proper dimentions sealed with a copper "crush" washer.
Justin C.
----- Original Message -----
From: "Graham Allan" <allan at physics.umn.edu>
To: <urq at audifans.com>
Sent: Friday, March 03, 2006 12:48 PM
Subject: [urq] MC1 oil cooler fitting


> Need to install an aftermarker oil cooler in an Urq, after transplanting
> an MC1.
>
> Does anyone know what the fitting is on the MC1 oil filter housing for
> the oil cooler lines? I know (or think) the thread is 18mm x1.5, but
> can't tell what kind of seat it needs. I need to adapt it to an AN
> fitting, and when I look for adaptors I see concave or convex seats
> listed - well, all the ones I see are concave, actually; however the
> original hose fitting doesn't look particularly concave - just seems to
> seal with a copper washer.
>
> Does anyone know exactly what I need here, or have a good source?
>
> Thanks!
>
> Graham
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>