[urq] Eibachs

[DGraber460 at aol.com]

In a message dated 3/14/2006 4:52:01 P.M. Mountain Standard Time,  
racingiron at comcast.net writes:

I'm  going through this right now.  Due to a wheel bearing mix-up (my  '86
has 83mm front bearings!) I had to temporarily put on a strut from  my
'85.  They both have Eibachs, but one is progressive and the  other
linear.

Martin, do you have the kit # for the linear urq  set?  I've got the
numbers for the 4KQ, 80/90, and urq  (progressive).  Brandon, do you have
the numbers from your  springs?  I'll try to get everything I can from
the tech at Eibach and  report back.

Eric
'86 urq
'93 S4

-----Original  Message-----
From: urq-bounces at audifans.com  [mailto:urq-bounces at audifans.com] On
Behalf Of martin at quattro.ca
Sent:  Tuesday, March 14, 2006 3:39 PM
To: Brandon Rogers
Cc: Urq  List
Subject: Re: [urq] Eibachs


Brandon,

Actually three  different versions for the typ 85
Two for Ur-q, one progressive and one  sport.
One for the 4000 quattro as well.
Funny but H&R has the same  spring for both, Ur-q and 4kq.

Anyhoo.. I had the 4kq version on my  Ur-q and it was way too low in the
front.  With H&Rs it's a bit  better, but still a bit too riceish... So I
just got the stock springs with  Billies and now I am very happy with the
ride and  look.

Cheers
martin
www.quattro.ca


> Guys-
>  are there two versions of Eibachs for the urq?  I ask b/c my car w/  
> Eibachs seems to sit low in front.  I don't think the 20V is  really 
> much heavier than the 10V but I could be mistaken.  Was  wondering if 
> maybe there is a set for cars with A/c and a set for  cars with no A/C.

> IIRC Audi had different springs for RR cars  depending on A/C....
>
> Anywya - if anybody knows anything about  this stuff...
>
>
> Brandon '84 ur  _______________________________________________


FWIW I have a set of Eibachs and H&Rs both progressive. I could maybe  get 
the numbers tomorrow night if anyone wants them.

 
Dennis
Denver