[urq] Brake Upgrade

[Jim Haseltine]

----- Original Message ----- 
From: <CARDCONSYS at aol.com>
[post snipped]
> Use S4/S6  G60 Caliper/Bracket Assembly which will fit exactly on the
> existing UrQ strut  mounting holes.
> Use disc from 100/200/5000 Quattro PN 447-615-301A/B.

> Use the complete S4/S6/V8 setup, calipers and discs. You will also  need 
> to
> change to the pair of handbrake cables used on the 1984 and later 4000
> Quattro, and if pre 85 car, a new handbrake yoke to accommodate the ‘hook 
> type’
> cable ends.
> Disc PN 857-615-601.

That's the stock Audi setup for the front brakes on the MB & RR Ur-quattros 
and the rear brakes on the RR.
With those units I've found that EBC 'Green Stuff' pads give excellent 
results.

Regards

Jim Haseltine