[urq] Strut tower bearings for early UrQ

[Thatcher Hubbard]

The difference I've heard between the "green" 4kq units and the "blue"
Urq ones is that the blue ones are of a much harder rubber.  I think
at least one Urq owner on the list has tried the green ones and
completely worn them out in very short order.

The increasing difficulty in find the blue units is what led me to an
interest in those spherical bearing units Mance Etheridge was making,
not sure if he's still doing it though.  At $395 for the pair though,
if they work as advertised, it's a deal.

On 5/11/06, Ben Swann <benswann at comcast.net> wrote:
> I am R/Ring and installing new Koni strut cartridges on my '83 Ur Quattro
> using stock springs.  I want to have parts on hand and went to order some
> strut bearings.  My local dealer informed me the bearings were unique for
> this application and were $167 each and in limited supply.  Ouch!  He said
> they were different from the 4000 quattro bearings which are under $30 each.
>
>
>
> So - what is so special about these UrQ strut bearings?  Can I substitute?.
> Is there another version that will work fine?
>
>
>
> Anyone have a set?  Any suggestions?
>
>
>
> Ben
>
> benswann at comcast.net
>
> 83 urq, /[][] =oooo= [][]\ alpine and Inga
>
> '90 Coupe Quattro (==\ oooo /==) ES2 Conversion
>
> 91 200qa20v, [ =!\=oooo=/!= ] avant and sedan
>
>
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>