[urq] prop shaft questions

[SpotatAshleys]

I can confirm that the part numbers given for the bearing and U/J in
follow-ups to this post are correct and work fine.
Many thanks folks.
regards
Keith
----- Original Message -----
From: "SpotatAshleys" <spotatashleys at hotmail.com>
To: <urq at audifans.com>
Sent: Saturday, May 13, 2006 6:13 PM
Subject: [urq] prop shaft questions


> Can anyone say for sure whether the propeller shaft off the 1986 coupe
quattro (non-turbo) (60mm dia) is a straight swap for the prop shaft of a
1987 WR quattro? It looks the same, has same centre bearing but non sure
about the diff and g/box fittings and overall length. Too wet outside here
to get under it! Fairweather mechanic me.
>
> Also anyone know of a UK supplier of the pro shaft Universal joint?
>
> Many thanks
>
> Keith
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>