No subject

mean by "stumbling" ... is it something that happens as you are =
accelerating, or is it also stumbling at constant power?  How long does =
the event last?  Does it repeat? =20

Here again, if you have completely swapped over to the MC ... meaning =
you've got a MAC-11 or MAC-14, you might well want to read out codes ... =
could the problem be related to knock sensors?  I'd also recommend that =
you monitor the OXS voltage when the event is occurring ...

Steve B
San Jos=E9, CA (USA)
>=20
> Funny you should mention it.  I am having a similar problem.  Started =
one day
> only at high boost (15psi).  Then a couple of days later it started at =
3 psi.
> I checked the fuel line and even replaced the fuel pump.  The Javad =
suggested
> looking at the ignition system.  Put in some new plugs, and now I am =
good for
> 10psi again.  Still not perfect, but I am going to replace the wires =
and
> cap/rotor as well.  It is worth a try.  The only thing I have not =
checked is
> fuel pressure at the dizzy.  I have a CIS pressure guage kit, but it =
has
> instructions on how to hook it up.  Does anyone kow how to connect =
one?