[urq] "The Project"

[Ed Kellock]

BTDT in the parking garage of the Park City Marriott.  Fortunately there was
an Ace Hardware store close by...

> -----Original Message-----
> From: urq-bounces at audifans.com 
> [mailto:urq-bounces at audifans.com] On Behalf Of Buchholz, Steven
> Sent: Wednesday, November 01, 2006 7:39 PM
> To: urq at audifans.com
> Subject: Re: [urq] "The Project"
> 
> 
> The one hose that attaches to the coolant hose flange at the 
> top of the engine is a fitting with a length of rubber hose 
> held in place by one of those funky stamped clamps that leak 
> over time.  I found it was very easy to remove the old small 
> length of rubber hose and the funky clamp, leaving a fine 
> surface for a short length of silicone line and a 
> conventional hose clamp ... far better than OEM to my way of 
> thinking ...