[urq] Brake Servo Pushrod Seal - Source?

[Alan Pemberton]

Eric

I sent the O rings removed from the servo to an O ring supplier in Ontario
and purchased several sets.
They haven't arrived yet but, once I've confirmed that the sizes are
correct, I'll post the information.

I'll follow up on the seal information you posted tomorrow - that's a great
lead.

Thanks

Alan
85 urq

----- Original Message ----- 
From: "Renneisen, Eric 475" <Eric.Renneisen at CIGNA.com>
To: <urq at audifans.com>
Cc: <alan_pemberton at telus.net>
Sent: Monday, November 06, 2006 10:20 AM
Subject: [urq] Brake Servo Pushrod Seal - Source?


Alan wrote:
> The O rings are on the way to rebuilt the servo and
> hopefully this will be sufficient to stop the AFT
> leak.  However if the seal needs to be replaced, can
> anyone provide contact information for a supplier.
> John at Sport Wheels (as reported by others) is no
> longer putting repair kits together due to "lack of
> demand".

When I got my kit from John, the pushrod seal was still in the
manufacturer's box.  I've still got that at home and I'll be happy to
forward on the name and specs.  Do you have the list of specs for all
the o-rings?  Since John's no longer supplying these, it'd be nice to
gather the info together so folks can build their own kit.

Eric R.
'93 S4
'86 urq

----------------------------------------------------------------------------
--
CONFIDENTIALITY NOTICE: If you have received this email in error, please
immediately notify the sender by e-mail at the address shown.  This email
transmission may contain confidential information.  This information is
intended only for the use of the individual(s) or entity to whom it is
intended even if addressed incorrectly.  Please delete it from your files if
you are not the intended recipient.  Thank you for your compliance.
Copyright 2006 CIGNA
============================================================================
==