[urq] Re-affixing Rearview Mirror to Inside of Windshield?

[Thatcher Hubbard]

I used a NAPA kit to re-attach mine when I bought the car 4 years ago.
 I didn't have to cut any fabric, just clean the windshield and
carefully hold the arm in place for a minute after applying the glue.
It's gotten reefed on pretty good more than a few times since then,
still stuck on there very well.

On 11/14/06, brozmotorz <brozmotorz at free.fr> wrote:
>
> use the Loctite kit and follow instructions precisely
> take care to cut the special "fabric" to the exact shape of the metal part
> you have to unscrew the metal part from the mirror itself and not put it
> back before 24/36h, the longer the better
> don't forget to draw the mirror emplacement outside the winshield before
> cleaning up the old glue remnants !
> if you do correctly, it will hold - any other glue will fail
>
> hth
>
> pierre
>
>
>
>
> > To my surprise, I knocked my mirror right off with a gentle accidental
> > bump as I was cleaning the inside of the windshield.
> >
> > Any good product tips / procedures to make sure it sticks for good this
> > time?
> >
> > TIA,
> > Jon
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>