[urq] Photo of my rear tie rod and chassis dent.

[Martin Pajak]

Just found a pic on my own website.

Here is what the orientation of the tie rod is supposed to be:
http://www.quattro.ca/19874kq/DSC05394.JPG

Hope this helps

Martin Pajak

http://www.quattro.ca

1982 Audi Ur-quattro (50,000 mi) new project
1983 Audi Ur-quattro (85,000 mi) Concourse d'Elegance
1985 Audi Ur-quattro (214,000 km) Euro spec. import mit 3B :)
1987 Audi 4000s quattro (212,000 km) wintervagen mit 7A :)
 
 

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of steven j
Sent: Tuesday, October 10, 2006 9:27 PM
To: urq at audifans.com
Subject: [urq] Photo of my rear tie rod and chassis dent.

paste this into your browser

http://pictureposter.audiworld.com/37382/tierodrear.jpg

same on deal other side.  H&R's are getting the blame.
 I must have 19 gallons in the car and there is about
.75" of clearance not including the .25 inch gouge in
the body.

I got some stock urq springs from a CA guy who posts
here from time to time but I showed them to MARTIN and
the canadians at UPG but they thought the color
markings weren't right (blue and white I believe). 
I've wanted to go stock springs, but am not sure if I
already have them.   I think ETKA shows yellow
markings for the front springs.  Rears springs I think
are the same ones from a 4kq. 


steve



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!