[urq] RE : RE : Photo of my rear tie rod and chassis dent.

[Louis-Alain Richard]

Don't forget the power of digital imaging !

LAR


> -----Message d'origine-----
> De : Lino M. Valadas [mailto:l.valadas at rogers.com]
> Envoyé : 10 octobre, 2006 22:49
> À : Louis-Alain Richard; 'steven j'; urq at audifans.com
> Objet : Re: [urq] RE : Photo of my rear tie rod and chassis dent.
> 
> Absolutely!
> 
> The power of this list never ceases to amaze me.
> 
> Cheers
> 
> Lino
> ----- Original Message -----
> From: "Louis-Alain Richard" <laraa at sympatico.ca>
> To: "'steven j'" <michellepfeiffersx at yahoo.com>; <urq at audifans.com>
> Sent: Tuesday, October 10, 2006 10:10 PM
> Subject: [urq] RE : Photo of my rear tie rod and chassis dent.
> 
> 
> Is it just me or the tie-rods are upside down... I will send you a
> picture of mine in another mail...
> 
> I think the case is closed !
> 
> Louis-Alain
> 
> 
> > -----Message d'origine-----
> > De : urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] De
la
> part
> > de steven j
> > Envoyé : 10 octobre, 2006 21:27
> > À : urq at audifans.com
> > Objet : [urq] Photo of my rear tie rod and chassis dent.
> >
> > paste this into your browser
> >
> > http://pictureposter.audiworld.com/37382/tierodrear.jpg
> >
> > same on deal other side.  H&R's are getting the blame.
> >  I must have 19 gallons in the car and there is about
> > .75" of clearance not including the .25 inch gouge in
> > the body.
> >
> > I got some stock urq springs from a CA guy who posts
> > here from time to time but I showed them to MARTIN and
> > the canadians at UPG but they thought the color
> > markings weren't right (blue and white I believe).
> > I've wanted to go stock springs, but am not sure if I
> > already have them.   I think ETKA shows yellow
> > markings for the front springs.  Rears springs I think
> > are the same ones from a 4kq.
> >
> >
> > steve
> >
> >