[urq] Rear Tierod correct setup direction confirmation

[quattrodude at comcast.net]

Ok, I'm going to be stupid, but whats up with the "Glow in the Dark paint" is it just some kind of undercoating? 

Or is it a cheaper way of putting a neon light kit under your car? (Just kidding)

JP Chaplen
-------------- Original message -------------- 
From: "fdekat" <fdekat at sentex.net> 

> 
> HEllo Steven: 
> 
> > Is it possible that if it was spun the "Other" way to clear the body, that 
> > it would be too "Low" and hit the sub-frame? 
> 
> I doubt that will be a problem, as looking at Martin's picture of the rear 
> suspension unloaded on a hoist: 
> 
> http://www.quattro.ca/19874kq/DSC05394.JPG 
> 
> Lots of clearance. 
> 
> Also, http://filebox.vt.edu/users/rfitton/ETKA/5_01_41-00.pdf shows the 
> tirod with the 'bend' in the down direction to clear the body. 
> 
> Rgards, 
> 
> =Frank= 
> 
> _______________________________________________ 
> Audifans urq mailing list 
> Send posts to: mailto:urq at audifans.com 
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq 
> Have an urq question? Check the Audifans Knowledgebase! 
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro 
> Have an urq answer? ... Please help others by adding to the KB ... all 
> contributions welcome!