[urq] RE : WX/KH Turbo oil feed hose

[Louis-Alain Richard]

2nd post, and more questions.

We managed to remove the 2 nuts on the top of the turbo (item 22). Heat
till red, then cool with lots of water. Funny how easy they were after
that... That's the good news.

The hose I talk about is item 18 in the 1_45_20_00 illustration.

Go here to see the illustrations:
http://filebox.vt.edu/users/rfitton/ETKA/1_15_9-05.pdf
and here http://filebox.vt.edu/users/rfitton/ETKA/1_17_9-10.pdf 
and here http://filebox.vt.edu/users/rfitton/ETKA/1_45_20-00.pdf 


Now, the allen-head bolts (item 17) at the other end are way too crusty
and deeply buried up there to get access without removing more parts
(alternator, snubber bracket, intercooler, etc.). So I am right in
thinking that I can remove the complete oil filter base (035 115 417B)
just by removing the big 035 145 447A nut and its hollow shaft 035 115
443 ? I will then only need a new gasket, and a new seal to reinstall.

Anybody can confirm ?

Louis-Alain