[urq] Megaquirt V2.2 5 cyl configuration

[Ben Swann]

I'm getting ready to fire my new engine up - using Megasquirt V.22 and MAC-14
for ignition (should be same config. As MAC-11).

 

Does anyone have some basic configuration files or screens I can compare with
mine.  I'm using Megatune 2.25 (trying to use  MSquirt and Spark Extra for
MAPdot code, but won't communicate with the V2.2 unit - I suspect the 9V
battery used for the Stimulator is too low.)  Megatune works fine to get my
initial setup correct.

 

I was looking for some samples on line, but not finding much.  Mainly I need
to verify injections per. Engine cycle - is it 1 or 5?  It is a single window
hall sensor, but pulse being generated by the ECU and should be 5 pulses - 1
per cyl.

 

I'm using 37 lb injector, high impedance.  Engine is MC-1 with NF big valve
head.Fuel Pressure set at 45PSI.

 

TIA for quick replies.

 

Ben