[urq] Brake servo parts list available?

[Alan Pemberton]

Mike

As I has to replace the seals in my servo, I ordered extra parts and can
provide the O rings and seal for the alloy servos (can anyone help with the
size of the O ring that is a different size for the cast units?).  Cost is
$35 which was my cost.  Contact me off list if I can help.

Alan Pemberton
85 urq

----- Original Message ----- 
From: <MikeDes156 at aol.com>
To: <urq at audifans.com>
Sent: Sunday, January 28, 2007 2:26 PM
Subject: [urq] Brake servo parts list available?


> Last year I managed to get a good (at the time) used complete brake servo
to
> replace my leaking unit. It wasn't to difficult to replace, other than the
> fact that it was from a RHD car so I needed to change the shaft. Now after
> about  8 months, this brake servo is also leaking. I know the rebuild kit
that was
>  offered at one time is no longer available. Has anyone compiled a list of
> the  sizes of o-rings and oil seal needed so we can put together our own
rebuild
> kit?  If I had a good set of micrometers, Id try and figure out what sizes
we
> need. At  least if we knew that, we could find the parts and do it
ourselves.
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>