[urq] Coil-On-Plug in '84 ur-q Tachometer Feed?

[Ingo Rautenberg]

Well, I'd say running car good.

Six Speed Urq = Badass!  ;-)

Ingo

On Jul 5, 2007, at 4:23 PM, Martin Pajak wrote:

> Patrick,
>
> I think Mike's plate if full enough to worry about a 6-speed, this  
> one has
> been off the road way too long now.
>
> Mike,
>
> Concentrate.. 6-speed bad, running car.. good!! :)
>
> Cheers
> Martin
>
>
>> Patrick Carlier
>> A friend of mine did this . Hes' got an ur-q RS4 .
>>
>> The AAN ecu has a tach out wire , only its' signal is far to weak
>> to drive the analog gauge .
>> IIRC there's a resistor and a diode to be removed in the tach ,
>> and another resistor has to be replaced with a different value , and
>> then the ecu tach signal can drive the gauge directly .
>> I'll contact him and try to obtain some more detailled information .
>>
>> Btw , have you ever considered putting in a six speed gearbox with  
>> the 3B
>> .
>> It's not an easy conversion , but it can be done .
>>
>>
>> Pat
>>
>>
>>
>>
>> ----- Original Message -----
>> From: "Brandon Rogers" <brogers at terrix.com>
>> To: "'Michael Hopton'" <Michael at siliconoptix.com>; <urq at audifans.com>
>> Sent: Thursday, July 05, 2007 8:01 PM
>> Subject: Re: [urq] Coil-On-Plug in '84 ur-q Tachometer Feed?
>>
>>
>>> Any particular reason you don't want to stick with the mechanical  
>>> feed
>>> from the tranny?  Or have you swapped in a Torsen?
>>>
>>> Brandon
>>>
>>> -----Original Message-----
>>> From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On
>>> Behalf Of Michael Hopton
>>> Sent: Tuesday, July 03, 2007 2:50 PM
>>> To: urq at audifans.com
>>> Subject: [urq] Coil-On-Plug in '84 ur-q Tachometer Feed?
>>>
>>>
>>> I am finally motivated to complete the coil-on-plug engine  
>>> conversion in
>>> my '84 ur-q. I had a 3B setup working perfectly but for some  
>>> depraved
>>> reason decided to convert it to coil-on-plug. During the  
>>> conversion an
>>> RS2 turbo, exhaust cam, MAF
>>> injectors and 944 turbo intercooler were added. So it is finally
>>> coming together.
>>>
>>> Any ideas on how I get an RPM signal for my '84 ur-q analog
>>> tachometer from an AAN coil-on-plug engine/wiring loom? Is
>>> the tachometer signal pin 40 on the ECU any good?
>>>
>>> cheers, Mike
>>>
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/ 
> listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ...  
> all contributions welcome!