[urq] Original 83 front calipers < 581 - screw that holds caliper to guide pins has been NLA for a long time.

[Todd Phenneger]

Depends on who you get your pads from.
I have gotten pads with the bolt and without.  I don't know off-hand but
when I get home I can check.  I have a bag with about 8 or these waiting for
future Brake Jobs.

l8r


> From: steven j <michellepfeiffersx at yahoo.com>
> Date: Thu, 26 Jul 2007 13:02:38 -0700 (PDT)
> To: <urq at audifans.com>
> Subject: [urq] Original 83 front calipers < 581 - screw that holds caliper to
> guide pins has been NLA for a long time.
> 
> 6 15 54-00 in ETKA
>    
>   My car has G60's but I have fresh old G54 calipers and 4 fresh old 280mm
> rotors.   I have the original G54s and caliper carriers but am missing these 4
> screws.  Also missing the flat plate that slips into the caliper piston
> hollow. (#4) in ETKA.
>    
>   Old etka (#3)  shows # for these screws as 431 615 141.  New ETKA says NLA
> instead of a part #.
>    
>      
>    
>   The don't give a screw dimension.  Anyone know?
>    
>   WOuld these screws be included with the PAD set?  The picture for PADs #13
> seems to show a screw in the photo.
>    
>   Newer cars use a screw that starts with 321.
>    
>   The flat plate #4 seems to be available, if it is really used (can't always
> trust etka). 
>    
>   steve
>    
>    
>    
>    
> 
>        
> ---------------------------------
> Fussy? Opinionated? Impossible to please? Perfect.  Join Yahoo!'s user panel
> and lay it on us.
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!