[urq] Rear diff. drain plug removal - back pocket tricks?

[Ado Sigal]

If you cut 17 mm allen wrench correctly, you can use both parts of it to 
undue the plug. Long part by itself or extended via a pipe, and short 
piece with 17 mm ring spanner.

Cheers,
 Ado



urquattro at comcast.net wrote:

>Title says it all...dead-end into the subframe cross member makes the impact option a non-option.
>
>I'm using a 4kq 4.11; assume the drain plug location is same as original urq trans...
>
>I'm thinking of using a pipe wrench with the "dummy" hex socket which I made by cutting 1" off a 17mm allen wrench but not sure I'm going to get enough leverage...any other ideas?
>
>TIA,
>Jon
>
>  
>