[urq] Finally back from the body shop

[Michael Hopton]

Mike,
 
Looks great! I can't believe it has been three years....
 
I like the removeable front clip and 3B inner fender
mods for the 3B air box. Integrated strut bar looks good
too. What are your plans for the hydraulics, the
reservoir is good and close to the firewall (some of the
lines might need to be extended) but you have the 
vacuum booster for the brake MC?
 
Where did you get the shroud for the Dialynx rad?
 
Cheers, Mike
 
 
 

________________________________

From: urq-bounces at audifans.com on behalf of Mike Sylvester
Sent: Tue 3/6/2007 9:25 PM
To: urq at audifans.com
Subject: [urq] Finally back from the body shop



I tried sending this to the list a week ago and have had trouble with my outbound mail to audifans.
I think it may be fixed now so here it goes again...

It's only been 3 years, but I finally have the bodyshell back from the shop.
The rust is fixed and the car is in primer and is edged.  After I re-install the drivetrain and suspension the entire body will get painted.

I've started doing a little test fitting in the engine bay.
I posted a few photos:
http://www.urq20v.com/body/Engine_bay/Engine_Bay_test_fit.htm

I'll try to keep current progress on my site.

Mike

www.urq20v.com
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!