[urq] Finally back from the body shop

[Brandon Rogers]

Yeah I have that shroud on my Ron Davis big Alum Rad (which has _all_
the factory mountings for a/c and fan shroud) - it's great to have the
big rad fan from the 200 20V - it _really_ moves some air...I got the
shroud through Sunset.  Valid US p/n for some reason.

Brandon

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On
Behalf Of Mike Sylvester
Sent: Tuesday, March 06, 2007 8:56 PM
To: Michael Hopton; urq at audifans.com
Subject: Re: [urq] Finally back from the body shop


Time flies.

I have the pump that goes with the 3B.
I've rebuild it and removed the pistons that are for the brake circuit.
I will get an external 75 bar pressure regulator so I don't blow out the

rack.
Ideally I would find someone to modify the internal pressure regulator.
As you noticed I modified the reservoir bracket to lower it and bring it

closer to the firewall.
I'll have to have custom lines regardless, since I am going from the 200

pump to the urq rack.

The fan shroud is from an ABY S2.

Mike

www.urq20v.com

----- Original Message ----- 
From: "Michael Hopton" <Michael at siliconoptix.com>
To: "Mike Sylvester" <mike at urq20v.com>; <urq at audifans.com>
Sent: Tuesday, March 06, 2007 10:14 PM
Subject: RE: [urq] Finally back from the body shop


Mike,

Looks great! I can't believe it has been three years....

I like the removeable front clip and 3B inner fender
mods for the 3B air box. Integrated strut bar looks good
too. What are your plans for the hydraulics, the
reservoir is good and close to the firewall (some of the
lines might need to be extended) but you have the
vacuum booster for the brake MC?

Where did you get the shroud for the Dialynx rad?

Cheers, Mike




________________________________

From: urq-bounces at audifans.com on behalf of Mike Sylvester
Sent: Tue 3/6/2007 9:25 PM
To: urq at audifans.com
Subject: [urq] Finally back from the body shop



I tried sending this to the list a week ago and have had trouble with my

outbound mail to audifans.
I think it may be fixed now so here it goes again...

It's only been 3 years, but I finally have the bodyshell back from the
shop. The rust is fixed and the car is in primer and is edged.  After I
re-install 
the drivetrain and suspension the entire body will get painted.

I've started doing a little test fitting in the engine bay.
I posted a few photos:
http://www.urq20v.com/body/Engine_bay/Engine_Bay_test_fit.htm

I'll try to keep current progress on my site.

Mike

www.urq20v.com
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection:
http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all 
contributions welcome!



_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection:
http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!