[urq] In Tank Screen Removal

[QSHIPQ at aol.com]

Ben
Just went thru this...  You can poke thru the bottom with a coat  hanger, 
and/or, grab it brutally with something thru the access hole.  Or,  you can just 
have the tank cut, coated and rewelded, and either leave the screen  out, or 
have a new one installed.  That runs about 200USD here in  chicagoland, and I 
know Riley did it for a little less than that in  Orlando.  
 
I will say that the prefilter is the better way to go than the intank  
screen.  You can backflush the prefilter to get out the crud, I got mine  all but 
crystal clear...  .  That prefilter is NLA from audi usa, I  cked about 3 weeks 
ago, none in the states.  That said, it is available  aftermarket if you use a 
4kq application (cheap too).  Definitely don't  forget the rubber mount for 
the tab to body, you want those hoses to stay high  close to the body, not the 
suspension....
 
HTH
 
Scott J
 
 
 
 



************************************** See what's new at http://www.aol.com