[urq] wastegate diaphragm
audiqtrocp at aol.com
audiqtrocp at aol.com
Sat Dec 6 20:22:56 PST 2008
I would just enjoy the 20+ psi ;o]
My red car use to do this intermittently, boy was it fun.
-----Original Message-----
From: urq <urq at pacbell.net>
To: urq at audifans.com
Sent: Sat, 6 Dec 2008 1:57 pm
Subject: Re: [urq] wastegate diaphragm
Which side of the diaphragm are you testing? If you're testing the upper
chamber I would agree that you would expect to see that it holds a good
vacuum. The bottom half is where the manifold pressure is applied, and that
side has the rod which goes to the wastegate proper. I've never tested the
lower chamber for how good a seal it makes, but I wouldn't be surprised if
it was leaky.
It could be that the wastegate mechanism is sticking or the WG spring is too
stiff or binding. You may want to pull the cap off and verify that you can
move the wastegate up and down, and that the spring is good.
Steve B
San Jose, CA (USA)
-----Original Message-----
Hi y'all!
My car is running great!
Diff lock panel is in place, both locks work, and the LEDs work too!
But, it's boosting up to 20-22psi, even at 1/3 to 1/2 throttle, 4500 rpm.
It feels like the timing gets retarded during this, which is good.
Problem is it doesn't hold vacuum. Visually I can't find a hole in any of
my WG diaphragms. Also, I just replaced the hose.
Could there be another leak source? A cracked WG cap?
TIA
Gary
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifa
ns.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
North American Celebration of the 25th Anniversary for the urquattro:
http://www.urq25.com/
Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
You can help keep the audifans site running by shopping at http://audifans.com/shop/
More information about the urq
mailing list