[urq] Rear Valance Wheelwell Screws

[Mike Sylvester]

I've never seen the factory parts prior to installation, but I would
guess that they are rivet nuts.
I replaced the ones on my car with generic stainless steel rivet nuts.
A rivet nut tool is used to install them.  It is much like a standard
rivet tool.

Mike

www.urq20v.com

> -------- Original Message --------
> Subject: [urq] Rear Valance Wheelwell Screws
> From: "Alan Pemberton" <alan_pemberton at telus.net>
> Date: Wed, July 30, 2008 7:59 pm
> To: "'URQ'" <urq at audifans.com>
> 
> 
> When removing the rear valance, found the 4 retaining screws on each side seized.  Now ready to reassemble and have obtained  the white plastic caps (431 809 100) that press through the holes in the wheel arch lip and the internally threaded aluminum inserts that slide inside the plastic caps (N 030 355 1).  Does anyone know how to anchor the aluminum part inside the plastic cap?  
> 
> Alan
> 85 urq   
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> 
> North American Celebration of the 25th Anniversary for the urquattro: http://www.urq25.com/
> 
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
> 
> You can help keep the audifans site running by shopping at http://audifans.com/shop/