[urq] Timng belt cover : removal tips needed

[Martin Pajak]

L-A,

You mean the bottom nut for the outer cover?
Regular allen key should work... or I've used vice grips on the outside
(it's a large shoulder) when the allen actually stripped.
Again, I've always removed/deleted the aux rad from all my cars as they
are not really necessary and makes the access very difficult.

Hope this helps.
Martin

PS. are you going down to Colorado??

> Louis-Alain Richard
> I have a problem with the t-belt steel cover backplate : it rubs on the
> camshaft gear. While I can remove the top fastener, the bottom one is very
> hard to get to without moving the auxiliary radiator. Is there a trick I
> don't know to get to it ? From what I see, I need an air ratchet with a
> short 6mm hex but mine is too big, it's a 3/8 drive.
>
> Any tips ?
>
>
>
> Louis-Alain
>
>
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>
> North American Celebration of the 25th Anniversary for the urquattro:
> http://www.urq25.com/
>
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
>
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/
>