[urq] 88 5KTQ yellow triangular front break pad warning light

[Tony Hoffman]

One of the two sides is not shorting all the way back to the computer
for some reason. I'd check on the side that had broken wires, and also
check to make sure the connector on the other side is making good
connection. There is no "reseting" the system. other than taking care
of the open circuit.

Tony Hoffman

On Thu, Mar 27, 2008 at 12:03 AM,  <JeffreyZentner at aol.com> wrote:
>
> Hi All
> I have an 88 5KTQ the yellow triangular front break pad warning light came on
> so I took off the front wheels and the both pads look fine on both sides. I
> measured the resistance and on one side it was less then one ohm and on the
> other side the connector was broken so I shorted the two wires together but the
> light still comes on. Is there something I need to do to clear the light or is
> something else wrong?
>
> Jeff Zentner