[urq] Early URQ rear bearing size?

Martin Pajak martin at quattro.ca
Thu Oct 16 17:43:26 PDT 2008


Hank,

The rear was always 75mm.
The bearing changed to 82mm but only in the front and only starting around
'86 on both 5ktq and Ur-q.
All 5kt before '86 were 75mm as well.

So.. Your car should have 75mm all around.

Hope this helps.
Martin Pajak

http://www.quattro.ca

1982 Audi Ur-quattro - SQ project 
1983 Audi 80 quattro - Euro 2-door!!
1986 Audi 4000cs quattro - 2,5 TDI mit 6-speed
1987 Audi 4000s quattro - wintervagen mit 7A & 5 bolt
 

> -----Original Message-----
> From: urq-bounces at audifans.com 
> [mailto:urq-bounces at audifans.com] On Behalf Of typeasnowboards at aol.com
> Sent: October 16, 2008 6:25 PM
> To: urq at audifans.com
> Subject: [urq] Early URQ rear bearing size?
> 
> Okay, So ETKA and some folks on Motorgeek have given me 
> conflicting information concerning the rear bearing size for 
> the URQ.? Do they follow the 5ktq with the 82mm bearing or 
> the 75mm bearing of the 4kq?? I have heard both, but was 
> hoping to get it right the first time.? I could have sworn 
> that I used 5ktq bearings up front when I did them, but now I 
> am starting to doubt myself.? Any thoughts? 
> 
> Thanks Folks
> Hank
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: 
> http://www.audifans.com/mailman/listinfo/urq
> 
> North American Celebration of the 25th Anniversary for the 
> urquattro: http://www.urq25.com/
> 
> Pictures/Polls/Database at: 
> http://autos.groups.yahoo.com/group/urquattro/
> 
> You can help keep the audifans site running by shopping at 
> http://audifans.com/shop/
> 



More information about the urq mailing list