[urq] Bringing her home!

[Todd Phenneger]

Agreed on Diff Lock panel.  I'll look for a pic of mine.  but I used a CGT panel, and only used 2-gauges.  Then in the center I grafted in a pull knob on ver-1 and a rotary knob from an 85' 4kq on version 2.   basically I found some plastic that matched.  Cut a hole and glued it to the inner hole.  Then drill and install.  It worked pretty well. 

--- On Wed, 4/15/09, Mike Del Tergo <mdeltergo at hotmail.com> wrote:

> From: Mike Del Tergo <mdeltergo at hotmail.com>
> Subject: Re: [urq] Bringing her home!
> To: urq at audifans.com, jim at almgt.com, brogers at terrix.com
> Date: Wednesday, April 15, 2009, 5:05 PM
> 
> I agree here, pretty plug and play for the I 5,  You
> don't have to move the diff lock panel if your resourceful,
> I can send you a picture.
> 
> Mike
> 
>  
> 
> 
> > From: "Brandon Rogers" <brogers at terrix.com>
> > Subject: Re: [urq] Bringing her home!
> > Here are my thoughts 
> > For gauges I like the factory 3-gauge panel from a CGT
> - but again then you
> > have to move the diff lock panel...
> 
> 
> _________________________________________________________________
> Rediscover Hotmail®: Get e-mail storage that grows with
> you. 
> http://windowslive.com/RediscoverHotmail?ocid=TXT_TAGLM_WL_HM_Rediscover_Storage1_042009
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> 
> Interested in helping make urq26 happen?  Send an
> e-mail to urq list admin.
> 
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
> 
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/
>