[urq] electric to mechanical speedo (Mike Sylvester)

[Justin Rettaliata]

Mike,

You need to pull the axle flange from 200 trans and remove the elec sender
parts.  Then take the mechanical odo/speedo parts from your UrQ trans and
put them into the 200 trans.  I did this for my 4000, and it's all
documented here:
http://www.motorgeek.com/phpBB2/viewtopic.php?t=10133&postdays=0&postorder=asc&start=275

let me know if you have any other questions.  Tried to explain it as clearly
as I could in my project thread.

-Justin
'85 4000tq
'83 UrQ



> Message: 2
> Date: Wed, 12 Aug 2009 06:33:57 -0700
> From: "Mike Sylvester" <mike at urq20v.com>
> Subject: [urq] electric to mechanical speedo
> To: "urq list" <urq at audifans.com>
> Message-ID:
>        <
> 20090812063357.195365548da1c44eaf4974b0054c21d8.d88eadfc40.wbe at email.secureserver.net
> >
>
> Content-Type: text/plain; charset="utf-8"
>
> For those of you that have used the '91 200 transmission when doing your
> 20v conversion, what did you need to change in the transmission to
> convert it from an electrical speedo to a mechanical type?
>
> It is definitely more than swapping over the part that the cable
> attaches to.
>
>
> Mike
>
> www.urq20v.com
>
>
>
>
> ------------------------------
>
>