[urq] Best Way to Change Fuel Pressure Accumulator

Frank de Kat fdekat at sentex.net
Fri Jun 5 19:48:31 PDT 2009


>
>Message: 7
>Date: Fri, 5 Jun 2009 09:57:12 -0600
>From: "Brandon Rogers" <brogers at terrix.com>
>Subject: Re: [urq] Best Way to Change Fuel Pressure Accumulator
>To: "'AF'" <afinn1 at gmail.com>, "'urq'" <urq at audifans.com>
>Message-ID: <82899A16B84444C79EFC53E163BDA115 at BCROGERS>
>Content-Type: text/plain;       charset="us-ascii"
>
>Andrew - what about putting some sort of plug in there instead of crimping?
>Yes you will lose some gas during the nasty part of getting the plug in -
>but less risk of damage.
>
>I don't know - just a thought...
>
>Brandon


Good thought Brandon...!

That's exactly what I do. I have  a special 'large bolt' for that 
job, and I can swing the hose from the pump to the bolt fairly 
quickly, then use the same clamp that was on the pump to clamp the 
hose to the bolt.  Not much leakage at all, and no real damage to the hose..

=Frank de Kat= 



More information about the urq mailing list