[urq] valve cover gasket

Thomas Pollock tompollock2002 at yahoo.com
Tue May 26 18:54:22 PDT 2009


so, I had a slight leak from the rear of my valve cover and while the car is down with other issues, I thought I'd replace the valve cover gasket. The one I tool off was cork. The one I got from the dealer was rubber. The one I took off was a total of three pieces (the gasket, the cam gear insert and the half moon). The one I got was in two pieces (the half moon and gasket. the cam insert was part of the full gasket) One of the studs on the head is what I believe to be a locator, in that it has a slightly larger spacer. The gasket I took off had a slightly larger hole to accomodate. The one I put on had none and I had to remove the metal built in washer? to accomodate the larger locator. I had a slight oil leak before, now I have a massive oil leak. Prior to locking it down, I checked and double checked I hadn't pinched anywhere. I've never used any kind of sealer and have done many 5cyl gaskets without ever having a leak. Should I ?
My question is, is this rubber gasket the correct gasket ? It's quite a bit "thinner" and the locating hole bothers me...
 
thanks,
 
tom.


      


More information about the urq mailing list