[urq] CQ Warning Light

[Ed Kellock]

And I just did.  I installed euros in my 91 Avant last summer/fall and have
been driving around with the beep ever since.  No longer.  It only took
about 20 minutes, including pulling and replacing that *&^%$#@ under-dash
knee bolster (amazingly!).

Ed
 


-----Original Message-----
From: Ed Kellock [mailto:ekellock at gmail.com] 
Sent: Thursday, April 01, 2010 1:07 PM
To: 'urq at audifans.com'
Subject: RE: [urq] CQ Warning Light


Or you could just do this...

Ed K.
 


-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
RockinV8Q at aol.com
Sent: Sunday, September 10, 2006 9:23 PM
To: v8 at audifans.com
Subject: [V8] Defeat the headlight warning...100/200/V8


Remove the headlamp bulb monitor ( aka warning relay) and bend pin  "K" 90 
degrees so when you reinsert it into its socket pin K no longer makes any  
contact. This prevents the ground signal from being sent to the Cluster.  :)
 
 100/200 has the monitor in the relay rack behind the drivers knee  pad, V8 
has it located in the pass floorboard relay rack. It looks like a  big
double 
relay and each pin is clearly labeled on the bottom of the  monitor.
 
KT