[urq] New clutch vibration

[craigcook at rogers.com]

Yes,

I've heard of clutches slipping slightly until properly worn in, however this sounds like a possible
flywheel, clutch disk issue, or even slight oil contamination on the clutch assembly itself.

Did you get the flywheel machined when the clutch job was done?
If no machining of the flywheel was done, I'd be starting there.

Usually reverse gear is the lowest of all gears, so this may explain  why the vibration in reverse is the most noticeable

Good luck

Craig Cook.

--- On Tue, 4/27/10, Maurits Jonkergouw <urquattro at moregraphics.nl> wrote:

From: Maurits Jonkergouw <urquattro at moregraphics.nl>
Subject: [urq] New clutch vibration
To: urq at audifans.com
Date: Tuesday, April 27, 2010, 2:50 PM

I was told vibration on a new clutch is normal and could take a (long) while to break in, but is this true? In reverse gear the vibration is even worse and  doesn't feel normal at all. Should I worry?

Thanks.



Regards,
Maurits Jonkergouw 
(mobile)
_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/