[urq] New clutch vibration

[Johnny]

I concur on the missing pressure plate bolt. I had one out of a 16v
Volkswagen and thought it had a severely warped flywheel from the feel
of the car. Turned out one bolt was missing from the assembly.
Expensive (but simple) fix.

Johnny

On Wed, Apr 28, 2010 at 11:54 AM, Patrick Carlier <p.carlier at pandora.be> wrote:
>  If it's on takeup only it's most likely  the  the flywheel
> that's warped .
>
> On a very rare occasion , I've seen a presure plate
> that had a missing bolt .
> That also caused vibration on takeup .
>
>
>
>
>
> ----- Original Message -----
> From: "Maurits Jonkergouw" <urquattro at moregraphics.nl>
> To: "Audifans" <urq at audifans.com>
> Sent: Wednesday, April 28, 2010 10:09 AM
> Subject: Re: [urq] New clutch vibration
>
>
>> Thanks guys!
>>
>>
>>> Did you get the flywheel machined when the clutch job was done?
>> According to the invoice: no...
>>
>>> Me thinks it could be a bad transmission mount, explaining the reverse
>>> thing. Are they
>>> known good ?
>> All mounts where checked so I guess yes, will check again.
>>
>>> There should be no 'new' vibration. It this on takeup or while driving?
>> On takeup and only if the pedal is released veeeery slowly and slipping.
>> No vibrations
>> otherwise.
>>
>>
>> Regards,
>> Maurits
>>
>> 1986 quattro GV (rebuilt)
>>
>>
>>
>> _______________________________________________
>> Audifans urq mailing list
>> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>> http://www.audifans.com/kb/List_information
>>
>> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
>>
>>
>
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
>
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
>
>