[urq] FW: Brakes for the UrQ

[Ingo Rautenberg]

L-A,

Absolutely.  But the importance of proper bedding-in can not be
overemphasized.

On Jan 28, 2010 10:03 AM, "Louis-Alain Richard" <larichard at plguide.com>
wrote:

I have a stupid question :

If someone install super-aggressive racing pads on stock rotors and calipers
(ok, maybe G60 fronts + S4 rears), I know the rotors would be eaten in short
distance, but could a system like that provide plenty of stopping power ?

I'm asking, cause I saw a works racing Ford Taurus SHO (1989) back in the
day, Scott Maxwell was the driver, and they were using stock FoMoCo rotors,
and change them each week-end. The car was racing in Showroom stock, so
modifications were minimal. And the 4 rotors were glowing red just after a
few laps, and stayed like that for the whole race. Could this be an
alternative for us who don't drive the car much ?

Louis-Alain



-----Message d'origine-----
De : urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] De la part
de racingiron at comcast.net
Envoyé : 27 janvier 2010 19:47
À : Steve Mills; afinn1 at gmail.com
Cc : urq list
Objet : Re: [urq] FW: Brakes for the UrQ

Steve Mills wrote: > I'm going to be test fitting Boxster calipers with
300mm rotors > in the ...