[urq] URQ fuel pump? - thoughts from Dupree

[Peter]

The part no. for the original hose is 857 201 220
The part no. for the 80/90 hose is 893 210 220C
Both are obsolete and none available in North America.  /pc

Dennis, why dont you try the hydraulic hose place on Fox street (Can't
remember name???) and see if they can put something together for you.

On Mon, Jun 21, 2010 at 9:15 AM, Ben Howell <bhowell at rmi.net> wrote:

> For the record, Audi makes a molded hose that is larger on one end for this
> exact application. If you have ETKA and you look in the 4kq catalog for the
> fuel pump, you will find that the 4kq fuel pump supersedes to a B3 80/90
> pump and then says: "Also Use" part number XXX-XXX-XXXX. That part number if
> the hose they came up with to solve the big-nipple-small-hose "issue".
>
>
>
> -----Original Message-----
>
> >
> >FYI: if you happen to hedge on buying the RR-engine UrQ partnumber
> fuel-pump instead of the WX-engine FP partnumber..  The inlet is quite a bit
> bigger on the unit for the RR engine.  Big enough that you cannot make it
> work with the stock plumbing.  Found this out the hard way.
>
>


-- 
WWW.USDEBTCLOCK.ORG