[urq] Converting Intake From WX to MC2
urq
urq at pacbell.net
Mon May 10 15:22:50 PDT 2010
I had the cap I put over the air shroud fitting on the head pop again . that
has been the only problem I've had with the car lately .
I need to get the car smogged, so I need to get going on completing the MC-2
conversion. In a way I'd like to swap the intake plumbing wholesale, but
I'm concerned that will take the car out of service for an extended period.
Has anyone here done a phased approach on converting to the MC or MC2? I'm
thinking that I could start with the intake manifold swap, but I don't think
the hose that comes up from the IC to TB will slip over the MC throttle body
. will it?
I guess I'll sit down with the parts to see if I can come up with a plan .
or if things are so simple that I should do the wholesale swap. I'm pretty
sure that I have the fuel metering head plumbing worked out to fit on the
urq with the guts swapped 180 degrees. The final step will be pulling the
wiring harness and wiring in the MAC-14 .
TIA!
Steve Buchholz
More information about the urq
mailing list