[urq] Converting to Euro's

[Bob]

Id like to relay them as well, we all know how robust urq wiring is 
*cough*. Mine is an '85 so its already sloped. The front end is 
together, all I need to do is plug them in now. I can make a harness, 
but it would be really nice if someone had a plug and play kit available.
Ill also need the trim above and below the lights to finish it off, I 
think 85 4000Q parts work. Let me know how you do Jason!
Bob



On 11/6/2010 9:02 PM, JAM wrote:
> Funny, I'm in the exact same spot as you, Bob.  From what I 
> understand, most on this list have relayed their lights and either 
> have made or bought harnesses.  I have a set of H1/H4s rectangular 
> lights mounted in the standard buckets and one of the POs of my car 
> adapted the standard wiring to make them work.....it certainly wasn't 
> rocket science but it worked.  They didn't relay the headlights so I'm 
> planning doing that when I install my lights.
> Are you going with the flat lights or sloped?  I'm converting to the 
> sloped lights and using a >'85 4kq grill and trim pieces......looks 
> like I'll have to cut some plastic to make this work.  Anybody had any 
> experience with this?
> Good luck with it Bob!
> Jason Mawhinney
> '83 urq
> '95.5 urS6 avant
>
> ----- Original Message ----- From: "Bob" <bob at maxboostracing.com>
> To: "Urq list" <urq at audifans.com>
> Sent: Saturday, November 06, 2010 8:30 PM
> Subject: [urq] Converting to Euro's
>
>
>> Today I took out the sealed beams and mounted the euro's. There any kind
>> of adapter harness available or do I need to make one myself?
>>
>> Thanks!
>> Bob
>> _______________________________________________
>> Audifans urq mailing list
>> Manage your list connection: 
>> http://www.audifans.com/mailman/listinfo/urq
>> http://www.audifans.com/kb/List_information
>>
>> Pictures/Polls/Database at: 
>> http://autos.groups.yahoo.com/group/urquattro/
>>
>