[urq] Sway bar hardware

[Louis-Alain Richard]

Something like this could be adapted ?

http://www.energysuspension.com/products/Sway-Bar-End-Link-Bushings.html

Louis-Alain


-----Message d'origine-----
De : Bob [mailto:bob at maxboostracing.com] 
Envoyé : 25 novembre 2010 18:04
À : Louis-Alain Richard
Cc : 'Urq list'; 'chris semple'
Objet : Re: [urq] Sway bar hardware

Thanks Louis-Alain!  I did try my local dealer, and its all NLA (go 
figure).  Seems to be the typical story with the UrQ

On 11/25/2010 6:00 PM, Louis-Alain Richard wrote:
> 853 411 335 is for the early cars with the bar attached to the lower
a-arms
> with a clamp and a green busching. Same part as any early coupe. You can
> also create one easily with flat stock metal and a press.
>
> 857 411 335B is for cars with the new style swaybar (1985 and up), same as
> any small-body Audi from 1984 to 1996. It's even installed on the Cabrio
up
> to 2000.
>
> Now, as for supply, any junkyard could help you. But I doubt there is a
> non-OEM supplier for these, so I guess it will be a dealer item for you.
>
> Louis-Alain
> (pdf of the etka page sent separately)
>
> -----Message d'origine-----
>
> Happy Thanksgiving everyone!
>
>
> I want to put my front sway bar back on the UrQ but dont have the
> mounting hardware. I have new bushings etc and the bar, as well as the
> vertical end links. But I dont have the clamps for the center bushings.
> Anyone know where to get those?
> thanks!
> bob
>
>